TRACE MAKING & ACCESSORIES

Crimping is a quick way of making strong traces. These crimps have a low diameter and black anodised finish to fit the Fox Carbo flex wire.

Sizes to suit 30lb or 40lb.

A smooth, strong, durable carbon coated wire that is more resistant to predator’s teeth than conventional multi strand wire. Extremely easy to tie or crimp (with the crimps supplied), Carbo Flex is the perfect material for all your trace making needs.

Exclusive to us, this seven strand stainless steel wire is extremely low in diameter and very supple.

A user-friendly wire, it is superb for making home-made traces and yet very kink resistant. The twenty pound breaking strain is recommended for close range work using through action rods. The thirty pound breaking strain wire is ideal for heavy duty situations where more powerful rods are in use. Crimps supplied.

Crimping is a quick way of making strong and reliable traces and preferred by many pike anglers today. These crimps have a low diameter and black anodised finish to fit both twenty pound and thirty pound wire.
Packed in 50s.

Neat tool used to create twisted trace connections.

Specially ground high quality Japanese Stainless Steel ensures that these cut cleanly through most modern stranded wires. Featuring soft touch handles for comfortable use even in the cold weather.

Small gadget incorporating a stainless needle with a tiny hook. Invaluable for sorting out wind knots or over-runs in braided reel lines.

This high quality nickel coated copper wire is ideal for attaching Bait Poppers to traces.

Loads of uses, mainly for float "stop knots" and distance or depth markers.
15mtr Green 12lb

These tapered rubber sleeves are designed to provide a neat finish to rigs and traces made using Fox Crimps. Whilst protecting the crimp, the sleeve also helps eliminate annoying weed and debris from collecting on the trace. 50 per pack.

Profiled to fit most treble hooks, these Treble Hook Sleeves have been designed to provide a neat finish and protect the wire wraps when making your own traces. A shorter, thicker, inner profile makes these sleeves perfect for covering the upper treble on twin hook traces. 25 per pack.

Enables tough skinned baits like mackerel/eel sections to be lightly hooked. Attach them to your trace system and follow the instructions on the packet. Allows a full-blooded cast to be made without needing to bury hooks in the tough skin of the bait, thereby avoiding the risk of not being able to strike the hooks into the pike’s jaw. Packed in 4s with oval split rings.

The perfect solution to creating tangle free paternosters these beads allow the main trace to spin around the uptrace wire.

It’s always wise to ensure that the minimum resistance is offered when a predator takes the bait. These large diameter rings and oval beads will ensure just this. Dropped runs due to excessive resistance could be a thing of the past.

Designed to accept our size 7 swivel, these profiled beads create the perfect stop for our run rings on resistance free rigs as well as protecting the knot during casting.

Cross-Eye Power Swivels available in size 5 and 7.

Use the diamond shaped eye to the wire, this then seats snuggley into a trace sleeve for a tidy tangle free presentation.

These are very useful rig components where a strong but discrete connection is required. The ideal clip for connecting our Floater Sticks to a wire link and for fitting ‘stinger’ trebles to jigs.
20 per pack.

This type of link is attached by simply twisting the connecting swivel onto it without opening it. This makes it highly secure and does not stress the clip from continual opening, making it very unlikely to break at the bend as other types can. The range of three sizes means that there is one for all popular applications in bait and lure fishing.

Designed to lock positively and not open under pressure, these links are essential when connecting traces to the mainline.

Size 2 (suits size 10 power swivel) 20PK

High quality rolling barrel swivels fitted with Safe-lok links.

Size 7 10 pack.

Kit contains 2 x ’Kwik’ change lead links, 2 x Saety sleeves, plus 1 x run ring and buffer bead.

Extremely useful for keeping line above bottom weed when legering. Where sensitivity to resistance is important, these are a must. Fitted with buoyant bodies, low resistance run rings and beads. 2 Pk

When pike are lethargic it is essential to troll baits in such a way that they closely follow the bottom contours, and the popular technique is to use the ’bottom bouncing’ method. This pack contains two 13" fibre stem ’bottom bouncers’ fitted with snap links, buoyant bodies and low resistance run rings and beads. These special stems will keep the bait right in the strike zone of fat, lazy pike.
2 Pk

Heavy duty stainless steel ’Kwik’ clip recommended by Mick Brown for pike fly fishing.

20Pk